Stroller Cup Holder is an essential tool for baby travel, with the increase in consumer demand, Stroller Cup Holder has been invited to its previous impression, the function has also been upgraded baby can eat, sleep, play games, etc., on the market Of the Stroller Cup Holder so much, parents how to choose the most secure Stroller Cup Holder it, today we come to understand.
A: Stroller Cup Holder appearance, with a visual and hand touch method to check whether the baby can reach the exposed area of the exposed tube, whether there are dangerous cracks and sharp edges, sharp corners, burrs.
Two: Stroller Cup Holder brakes, press the brake lever, a little hard forward, after the push and pull, observe the brake lever is off, sliding. In addition, the brake lever is best marked with a clear color, so you can avoid the use of the wrong step.
Three: Stroller Cup Holder set the basket, in order to ensure the Stroller Cup Holder center of gravity is stable, the location of the basket should be lower, and close to the rear wheel.
Four: fabric, to avoid the choice of color is too bright fabric, because the more bright cloth to add more chemical ingredients. The cloth part to be able to remove the cleaning, to ensure continuous use of cleanliness.
Five: Stroller Cup Holder handle, the film surface to smooth, no peeling, cracking, leakage paint, wrinkled skin and aggregated sand. If it is sprayed parts, the surface should be smooth and smooth, uniform coating thickness, can not have exposed at the end, stains, color mixing defects.
Six: folding device, repeatedly folded several times to see whether the device is flexible, with or without obstruction to open and close the phenomenon. To prevent the Stroller Cup Holder from accidentally folding, the folding locking device should take two steps to open and check that the locking device is easily loosened.
Seven: Stroller Cup Holder seat belts, seat belts to include at least a group of belts and a crotch belt. Belt and the minimum width of the crotch belt should be 20mm, the width of the shoulder strap should be a minimum of 15mm.
Eight: Stroller Cup Holder plate, plate material and paint must meet safety standards. This is no way for ordinary consumers to check, and in the "children Stroller Cup Holder safety requirements of national standards" in this made clear. Therefore, to the regular shopping venues to buy well-known brand of baby carriage comparison insurance.
Nine: pocket: seat pocket to match the age of the baby. 6 months below the baby is best lying in the small Stroller Cup Holder, the selection to ensure that the extension of the "small bed" flat, there is no obvious bend of the traces of bending, soft and hard moderate, the minimum internal height of not less than 180mm. Stroller Cup Holder The Stroller Cup Holder with an angle of less than 150 ° between the backrest and the cushion is not suitable for babies of less than 6 months. Can be folded into the umbrella of the light Stroller Cup Holder because the back is not supported, not suitable for 10 months below the baby.
Ten: small parts, in the baby can reach the scope, there should not be into the mouth of the small parts. For non-removable small parts, should not let the baby with your fingers or teeth pulled out. In addition to the seat belt, there should be no strings, straps and other narrow strips.
Eleven: the wheels, the small Stroller Cup Holder on a flat ground to see if it can be placed smoothly (wheel landing roughness should be less than 5mm). Straight line, test whether the deviation from the line. Press the horizontal "8" -shaped push to see whether the wheel rotation is flexible.
Stroller Cup Holder safety is essential for the baby, I believe that understanding so much, parents in the choice of Stroller Cup Holder can be inspected from the eleven aspects, so choose a suitable for their baby Stroller Cup Holder.
How To Check The Security Of The Stroller Cup Holder
- Oct 09, 2017-